Only show results in USA? Ok

Water & Wastewater Applications

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Machineries for beverage container recycling

    Every beverage bottling facility requires a cost efficient, clean method for the disposition of out of date or out of spec products. Shred-Tech® has been providing solutions to suit this need for many years. All shapes and sizes of cans, plastic bottles and aseptic packaging have been processed using our systems.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Industrial gas detection solutions for semiconductor manufacturing processes sector

    Semiconductor manufacturing processes involve highly toxic substances and flammable gases. Our ChemLogic 96 Continuous and DOD64 FTIR Sequential gas analyzers are staples in this industry with over 1,000 machines operating every day worldwide. Our gas analyzers can be found in a few different places throughout a fabrication facility such as: In the Wafer Reactor, Wafer Dryer, Gas Cabinets, and during Chemical Vapor Deposition. Our units are designed with clean environments in mind. With a sample draw of 400 feet...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    Industrial gas detection solutions for polyurethane foam manufacturing sector

    Polyurethane Foam requires toxic gases in it’s manufacturing process. The most common gases fall into the Diisocyanate family of gases. Toluene Diisocyanate (TDI) and Methylenediphenyl diisocyanate (MDI) have exposure limits set by the Occupational Safety and Health Administration (OSHA) to ensure employee protection in polyurethane facilities.

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Technologies for Wastewater Treatment in Dairy Industry

    Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Hand-Held & process control water testing instrument for Boilers and cooling towers

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water & wastewater treatment solutions for commercial industry

    From cutting-edge MABR wastewater treatment to containerized desalination, Fluence delivers cost-effective and sustainable solutions for commercial customers worldwide. Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for commercial clients, including resorts, golf courses, commercial buildings, and campuses.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Water treatment solutiions for power industry

    Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality controls.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Metal Sludge Plants for Oil and Metal Industry

    Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Process cooling and industrial comfort applications solutions for food and beverage industry

    Refrigeration is needed in all food and beverage supply chain starting from the production for ending with distribution and involving a wide range of temperatures.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Process cooling and industrial comfort applications solutions for machine tools industry

    HITEMA with its range of product solutions is able to grant an energy and water saving maintaining a precise an stable temperature control for the operations of welding machines, for precision machine tools, metal cleaning processes where the precise cutting oil and hydraulic fluid temperature permit high speed operations and low maintenance costs, it permits also to increase the productivity and the lifetime of the machining center.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Process cooling and industrial comfort applications solutions for chemical and pharmaceutical industry

    Temperature fluctuations can have detrimental effects on precise manufacturing or testing processes within the chemical and pharmaceutical industries. Increased product quality, and process transparency can be achieved in drug formation with the help of our advanced temperature control solutions. We can tailor these to meet the stringent needs of your plant and processes. Precision shall be achieved without losing reliability and efficiency in the process in order to preserve customer production and enhance cost...

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Temperature measurement and control devices for OEM industry

    TTEC custom designs Thermocouples & RTD`s for OEM Applications. These sensors range from small diameter, fast response sensors to rugged heavy duty process assemblies.Manufactured in small or large quantities, these sensors are precisely manufactured to meet or exceed specifications. TTEC OEM product solutions include high accuracy, fast response RTD`s used in Analytical Instrumentation, High Temperature Platinum Rhodium Double Tube Assemblies for Combustion Based Equipment and oil sealed, spring loaded RTD`s...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Temperature measurement and control devices for aircraft & aerospace industry

    TTEC manufactures T/C`s & RTD`s for a variety of Aircraft & Aerospace Applications, including Test Stands, Environmental Chambers and Heat Treating Furnaces for Aircraft Components. NIST Traceable calibration tests and material tests reports are available as required. TTEC Style 8012 RTD`s with DIN Class A special accuracy are use to precisely measure Environmental Chamber Temperatures. These Chambers re-produce in-flight conditions that aircraft parts will be exposed to. Accurate & Stable readings...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you