As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.
Renewable energy plants are expanding and being developed at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon...
Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.
Analytik Jena’s high-performance instruments will provide you with a deeper understanding of the chemical composition and characteristics of advanced materials and chemical products, both in research and quality control. Our highly effective analysis instruments not only simplify your daily routine work, but also improve your products over the long term thanks to higher precision in your measurement data.
Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater.
Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas.
The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant.
The benefits are the...
Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.
HITEMA with its range of product solutions is able to grant an energy and water saving maintaining a precise an stable temperature control for the operations of welding machines, for precision machine tools, metal cleaning processes where the precise cutting oil and hydraulic fluid temperature permit high speed operations and low maintenance costs, it permits also to increase the productivity and the lifetime of the machining center.
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.
Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction...
Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.
The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.
The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.
To produce efficiently several feed formulations starting from continuously changing raw materials and premixes, require flexible and accurate analytical and formulation technologies. BUCHI offers dedicated solutions for the entire value chain: from R&D and QC laboratories to the production lines.
Discover Analytik Jena’s molecular biology and chemical analysis solutions for the pharmaceutical and life science industries. All of the solutions can be automated to a high degree thanks to our extensive liquid handling portfolio. Whether nucleic acid extraction, protein analysis with ICP-MS or various PCR and qPCR/Real-time PCR solutions, early research, or the evaluation in clinical studies, our technologies and methods will increase efficiency of your entire workflow.
The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.
Effective, safe and sustainable processes play a key role in the chemical industry. To meet these needs, BUCHI offers a variety of reliable and modern solutions for R&D, scale-up, production and quality control.
The oil and gas industry involves several manufacturing processes and upstream processes that require gas detection solutions to be used on a daily basis. Whether its offshore drilling and exploration, or onshore refining and production of gasoline DOD technologies offers several options to keep work environments up to code and safe for your workers. If you’re in need of a Class1, Div1 unit or need a different option in a non explosive environment, our sales staff will be able to assist in determining what...
One of the largest users of gas detection safety equipment are Chemical Storage and Chemical Manufacturing Plants. Toxic, asphyxiant, and flammable gases are commonly used in manufacturing and are also by products of the manufacturing process. Storage of these gases is done on site in large metal cylinders. The transferring of gas into other containers or to other parts of the plant can release these gases into the air. Portable and Fixed gas detections systems work together to provide a safety net of gas detection...
The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.